Alinco DR-138T Part 90 Commercial Radio VHF
ALINCO’s feature packed Analog VHF Mobile Radio is perfect choice for multiple applications. The DR-138 is a mobile/base radio that delivers power and performance in a small package. User-friendly configuration and programmable features make the DR-138 the radio of choice for business and commercial use without compromising higher price.
FEATURES:
60 watts (H), H/M/L power settings
200 memory channels
Voice Compander (Reduce Noise & enhance audio clarity)
Wide variety of selective calling features Built-in
2-Tone, 5-Tone, 50 CTCSS, 114 DCS, 4 Tone-burst tones and DTMF/ANI decode
Radio stun/kill/revive functions to protect your communication security
Large, bright LCD and easy-to-operate backlit keys
Multi-function, backlit microphone enables direct frequency entry & more from keypad
Various scan modes, Key lock, Wide/Narrow operations and more at no extra cost!
Inversion Scramble (DR-138S only)
Frequency range |
136.000-173.9975MHz |
Channel Spacing |
25KHz (Wide mode) |
Channel steps |
2.5KHz,5KHz, 6.25KHz, 8.33KHz, 10KHz,12.5KHz, 15KHz, 20KHz, 25KHz, 30KHz, 50KHz |
Memory channel |
200 channels |
Antenna impedance |
50 ohm unbalanced |
Squelch |
Carrier/CTCSS/DCS/5Tone/2Tone/DTMF |
Frequency stability |
+/- 2.5ppm TCXO |
Power supply requirement |
13.8V DC +/- 15% negative ground |
Current drain |
Approx. 11.0A TX High |
Usable temperature range |
-4°F to +140°F (-20°C to +60°C) |
Dimensions (w/o projection) |
145(W) x 47(H) x 190(D) mm |
Weight |
Approx. 1.2Kg (43.3oz) |
TRANSMITTER | |
Output power |
Approx. 60W(HI) |
Modulation system |
Variable reactance frequency modulation |
Adjacent Channel Power |
≥70dB |
Hum & Noise |
≥40dB |
Spurious emission |
Less than -60 dB |
Maximum frequency deviation |
+/- 5 KHz (FM) / +/- 2.5 KHz (NFM) |
RECEIVER | |
Receive system |
Double-conversion superheterodyne |
Sensitivity (-12dB SINAD) |
Less than -16.0dBu |
Intermediate frequency |
1st IF 21.7 MHz, 2nd IF 450 KHz |
Selectivity |
-6dB: +/-12KHz or more (FM) |
Audio output power |
More than 2W(8ohm 10%THD) |
Note: |
* 1 Optional units required |
STANDARD ACCESSORIES | |
|
|
OPTIONAL ACCESSORIES | |
|