U17345 Used Yaesu FTDX10 100W HF/50 MHz Transceiver in Box

This Yaesu FTDX10 radio is in great used condition, but it has a strong pet odor to the box and the radio. There are no cosmetic defects to note, and this radio looks great all around. The screen is bright, clear, and legible. This radio has been wiped down thoroughly and has no dust or dirt built up on the exterior. There are no cosmetic issues to note and the radio works great. Radio comes in the original box with Yaesu microphone, DC power cable, dust cover, and an owners manual. This radio has very light use and there are very few signs of wear anywhere on this unit, just the odor to note. Comes in the original box, which was too large for the photo booth. The smell seems to be mainly the box, the radio is not as bad but the smell is there. It is not tobacco or smoke. It is a strong pet odor maybe

Purchase is covered under our 30 day warranty. 

Additional Product Details: 

Hybrid SDR Configuration

Like the FTDX101 series, the new FTDX10 utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope.

Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics

Like the FTDX101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted. It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor. Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more in the 14MHz band at 2kHz separation.

250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception

The local circuit of the new FTDX10 uses 250MHz HRDDS method same as the FTDX101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145dB or less in 14MHz at 2kHz separation.

3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel Functionality

The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed, and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTDX101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.

SN: 1C030271

Item is covered under our 30 day in-store warranty.