ROHN Tower Adjustable House Brackets include the standard duty models for wall and eave bracing of 25G series towers that are installed as self-supporting or guyed. As with all ROHN tower accessories, these bracket models are all galvanized.

ROHN Tower Adjustable House Brackets are completely adjustable, from 0 in. up to 36 in. offset depending on model, to handle most house wall bracketing installation of 25G tower where there is an overhanging eave to be cleared. These models HB25AG, HB25BG, and HB25CG are intended for use for a guyed or self-supporting ROHN 25G tower installations. Even for 25G towers that are installed with a sufficient base and design to be self-supporting, many municipalities require towers that are mounted next to a house to be bracketed to the house. ROHN Tower Adjustable House Brackets provide sufficient adjustments for virtually every tower house bracketing situation. The Universal Eave Bracket, model EB2525G, offers hinged connections which allow the tower leg clamps to remain perpendicular to the ground while bolt down supports rotate to lay flat along the pitched roof or under the pitched eave. These ROHN Tower Adjustable House Brackets are for self-supporting or guyed installations only and are not intended for bracketed only tower installations.