Vonets VAP11G-300 is a professional 300Mbps Mini WiFi Bridge. Allows a WiFi connection in devices that only have RJ45 network port. Its simple setup, in 2 minutes. Need feeding between 5V and 15V obtainable USB port or external power supply.
VAP11G-300 is a safe environmental WiFi signal Repeater. In WiFi bridge and repeater mode, VAP11G-300 can double extend the existing WiFi signal range, also can make sure the safey of WiFi signal. The work theory is: on the edge of the original WiFi hotspot signal coverage, put a VAP11G-300 under "WiFi Repeater mode", VAP11G-300 will extend the weak WiFi signal receive to normal and safe strength and after optimization and error correction processing to reach the double extension of WiFi signal range under the premise security. It is different from traditional WiFi Signal amplifer—it just amplifies the signal and ignore the WiFi security.
VAP11G-300 provides three kinds of power supply methods, omits the worries of carrying a lot of power adapters, usage is more flexible; Plug and play, meet the flexible network solutions. VAP11G-300 has practical function, superior performance, is easy for management and provides multiple safe protective measure, can protect the security of user’s WiFi network.
- Traditional intelligent WiFi Bridge, together with WiFi repeater function.
- It can be used for any wireless network product.
- IEEE 802.11 B/G/N compliant.
- Support WEP (64 & 128 bits), WPA y WPA2 Security access.
- Support SSID broadcast.
- Frequency: 2.4Ghz.
- Support WEB remote firmware upgrade, can get the latest firmware free.
- Enviromental, Safey, Portable, Mini
- Reception signal 100 meters without obstacles, but between 25 and 30 meters.
- The new addition of a USB wire is to connect a computer (desktop, laptop)for power, no need extra power adapter.
- Support Wifi model: AP Client
- Small size: 1.5cm x 4.5cm x 9cm.
- CE certification.
- Support any VoIP ATAs and VoIP Phones.
- Support any IP camera.
- WiFi intelligent bridge mode, it supports WiFi hotspot scan automatically and WiFi hotspot memory function.
- Support local WEB management, Chinese and English configuration interface.
- Adopt the original creation D/A temperature compensated auto frequency control technology (TAFC), make sure the lasting stability to ensure that the WiFi signal is not dropped.
- Original creation VDNS virtual domain configuration technology to solve the user’s trouble of configuration.
- WiFi Hotspot (it is suitable for hotel room usage).
- Support connecting more than 20pcs WiFi terminal at the same time.
- Support WPA-PSK/WPA2-PSK、64/128/WEP security mechanism.
- Support 802.11n WiFi transmission protocol, 300Mbps rate of transmission.
- The transmission distance (without obstacle): 100m
- Wide voltage (DC5V-15V), Low power consumption (2W), no need special power supply, can reduce electronic waste generated.
There are 2 ways to feed the VAP11G directly connecting it to a USB port or using a DC ADAPTER should not exceed 15V. In this way we can power the device itself, Ip camera, receiver, etc ...
We only have to install the software on a PC or Laptop to connect the set and finally VAP11G RJ45 cable to the device.